ESAB OK231 FLUX IN 55# BAG P/N 8334F09

Description

ESAB OK231 UNIOMELT FLUX 55# BAG P/N 8334F09
OK Flux 231 is an active, bonded flux designed for fillet and butt welding of carbon steel plate. It provides excellent tolerance of rust and mill scale so joint preparation can be minimized. This flux will produce horizontal fillets up to 3/8" (9.5 mm) leg size without undercut or rollover. The slag peeling is excellent. OK Flux 231 can be used for multipass welding, but because Mn and Si buildup is possible, welding voltage should be kept to a minimum and plate thickness should be limited to 1" (25 mm). OK Flux 231 is suitable for DC single and parallel wire welding at currents up to 1000 A. It is used for welding rail cars, water heater tanks, ship plates, and structural steel.
Industries
Railcars
Ship/Barge Building
Structural Steel Fabrication
Tank and Vessel Fabrication
Welding Process
Welding-SAW - Submerged Arc Welding
SHIPPING TO 48 CONTIGUOUS STATES ONLY!!!
CONTACT US FOR SHIPPING CHARGES